Click me to Order

Jorgensen 50XXX 3/4" Pony Steel Bar Clamp Fixture

The best ideas are often the simplest, which explains why Jorgenson is well known among woodworkers as the maker of some of the best clamps available, and their 3/4-inch steel bar clamp is no exception. No shop can have too many of these. They offer a basic, reliable design--featuring a crank handle, no holes, no rivets, and no notches--that leaves little room for improvement. These clamps are great for a huge variety of jobs, can be used on any length of pipe your task requires, and can be relied on to keep their grip without loosening up or slipping. Removing the clamps when the job is done is quick and easy every time. Sure, some may say that a clamp is a clamp, and to some extent that's true. But with so many brands on the market, there's a reason it's so hard to find a shop that's not full of Jorgenson clamps. If you're looking for reliable clamps at a price that allows you to buy as many as you need, Jorgensen clamps are tough to beat.

Click me to Order

Olympia Industrial 12-006 6" Heavy Duty Swivel Tip C-Clamp

This 6-inch heavy-duty, industrial-quality C-clamp has a copper-plated screw and heavy-duty swivel tips for malleability.

Click me to Order

Bessey WS-3A Angle Clamp

Used in many applications including cabinet work, furniture assembly, and framing, these unique and versatile clamps are designed to hold, fix, and align material at 90 degrees. The jaws are die-cast and plastic-coated with a rear jaw that swivels allowing you to hold different material thicknesses--always at a 90-degree angle, leaving ample clearance to screw, dowel, or staple material together while gluing.

Click me to Order

Bessey WS-6 Angle Clamp

These unique, versatile clamps are designed to always hold, fix, and align materials at a 90 degree angle. Ideal for many applications, including cabinet work, furniture assembly and framing. Jaws are die cast and plastic-coated, rear jaw swivels allowing you to hold different material thicknesses - always at a 90 degree angle. Clamp at maximum opening will accommodate: Different material thicknesses of 1 in. one side, 6 in. other side; Uniform material thicknesses of 4 in. both sides. 2-7/16 in. clearance for t-joints. 4-1/2 lbs. each. (Angle clamps can be hand held or mounted to work table with two TK-6 table clamps (available separtately).

Click me to Order

Merle 9012P Adjustable Corner Clamp

Merle is a one piece clamp that has almost no capacity limitation (from as small as 2-5/8 in. x 2-5/8 in. to 69 in. x 69 in. or 22 feet around, but can be extended to any length by using standard 3/8 in. steel banding or strapping. Excellent for narrow picture frames, holding work for gluing, nailing and screwing. Cast aluminum and steel construction-a true industrial quality tool.

Click me to Order

Pootatuck Corporation TOPT Top Trim Attachment

Secures tapered, curved, hollow and other difficult to hold pieces for compound cuts.

Click me to Order

Gross Stabil MGS100 Multi-Angle Clamp

Differently angled workpieces are positioned by hand while round or oval workpieces can easily be clamped. The clamp angles from 0 to 120 degrees in 15-degree increments. This multi-angle clamp features a quick clamping system with an adjusting lever up to 4 inches and a clamping force up to 350 pounds. Epoxy-coated, die-cast housing.

Click me to Order

Quick-Grip Quick Change 536QC 36" Bar Clamp/Spreader

The invention of Quick-Grip bar clamps revolutionized clamping with the introduction of the first one-handed bar clamp. Now comes an even more versatile addition to the line of Quick-Grip bar clamps: the Quick Change bar clamp/spreader. It is quicker to use and more versatile. This 36-inch bar clamp changes into a spreader as quick and easy as 1,2,3. No tools required. The Quick Change multi-position jaw can be positioned anywhere on the bar making even the most challenging clamping or spreading task a snap. This Quick Change Quick-Grip Bar Clamp/Spreader has a clamping capacity of 36-inches, and a spreading capacity of 7-1/2-inches to 44-5/8-inches. The quick one-handed operation means less hand fatigue, and combined with the ability to easily slide the handle into position by engaging the metal Quick Release Trigger, clamping has never been so quick. The Ergonomic Pistol Grip provides a comfortable grip and concentrated clamping pressure. This 36-inch bar clamp/spreader comes with non-marring, stay-on pads. These pads are designed to firmly stay in place while clamping, yet they are easy to remove or change, if desired. The Quick Change bar clamp/spreader is manufactured with quality and pride in the USA. Full lifetime warranty. Each Quick-Grip clamp is warranted to be free from defects in material and workmanship for the life of the tool, except for damage caused by abuse, misuse or alteration.

Click me to Order

Bessey K3.540 40" Max Opening K-Body Clamp

Countertop fabrication and face frame construction just got easier with this 40-inch clamp. The revolutionary all-steel design ensures the jaws remain parallel. The jaws are encased in a non-marring, glue resistant material, making the clamp ideal for all gluing applications, including face-to-face and edge-to-edge. 1,000 pounds of clamping pressure are evenly distributed over the entire jaw surface while the sliding-arm braking system ensures parallel clamping without slipping.

Click me to Order

Quick-Grip Quick Change 550QC 50" Bar Clamp/Spreader

The Ergonomic Pistol Grip provides a comfortable grip and concentrated clamping pressure. This 50-inch bar clamp/spreader comes with non-marring, stay-on pads. These pads are designed to firmly stay in place while clamping, yet they are easy to remove or change, if desired. The Quick Change bar clamp/spreader is manufactured with quality and pride in the USA. Full lifetime warranty. Each Quick-Grip clamp is warranted to be free from defects in material and workmanship for the life of the tool, except for damage caused by abuse, misuse or alteration.

Click me to Order

Quick-Grip 59200CD Handi-Clamp

Use this clamp on the job, in the workshop, garden, or garage - anywhere you need an extra hand. Handi-Clamp combines speed and convenience with controllable pressure. The jaws are designed to reach around odd shapes, there are non-marring swivel pads, and a high tech resin construction. Simply squeeze to control the pressure of the clamp with its simple one hand operation feature. Other features include a quick release trigger and non-slip handles.

Click me to Order

Jorgensen 52XXX 1/2" Pony Steel Bar Clamp Fixture

The Pony no. 52 clamp is smaller and lighter making countertop or cabinet projects easier. This fixture allows you to make bar clamps of any length with a 1/2-inch pipe (not included). No holes, notches, or rivets are required to assemble; just screw the head on regular pipe threads. The multiple-clutch system is constructed of plated hardened steel that grips the bar automatically at any point. The clamp faces are 1-1/2-inches-square with a baked enamel finish. One set makes one clamp.

Click me to Order

Bessey KBK2440 Cabinet Door Kit

This cabinet door kit has the most advanced hand-clamping technology available. An innovative all-steel design ensures that jaws remain parallel. All-steel jaws are encased in a nonmarring, glue-resistant material. Ideal for frameless construction, furniture construction, countertop fabrication, and face-to-face and edge-to-edge gluing. Kit includes two 24-inch and two 40-inch clamps and one KP Block Set.